Centrifugal Pumps
(Kopie 1)
PRODUCT OVERVIEW
JP Product Range
Centrifugal pumps of the JP-Series are especially suited for the hygienic and flawless movement of biologically challenging materials with a viscosity of 1,000 mPa s.
JPS Product Range
By combining the existing JP-Series with an upstream worm pre-stage a new generation of hygienic self-priming centrifugal pumps has been born.
The new Jabsco product range JPS makes available products with a high percentage of gas but a low sound level, the highest level of efficiency and excellent cleaning qualities. The JPS-Series also makes possible the evacuation of suction side pipeline plumbing systems. Thus only one pump is required for CIP-Return and product discharge. The new JPS-Series is utilized for all CIP-return-applications, for tank drainage, as well as for the discharge of products containing gas.
Product Ranges
(Kopie 5)
JP CENTRIFUGAL PUMPS
- Normal-priming
- Flow Rate max.: 220 m³/h
- Discharge Pressure max.: 90 m Ws
- up to 1,000 mPa s«
(Kopie 7)
JPS CENTRIFUGAL PUMPS
- self-priming
- Flow rate max.: 68 m³/h
- Discharge Pressure max.: 64 m Ws
ADVANTAGES
System advantages JP
All parts coming into contact with the product are manufactured from the highest grade stainless steel. Spiral casings designed for a high degree of efficiency ensure minimum turbulence and therefore careful transportation of the product. Standard components such as shaft seals and sealing rings are available worldwide. The utilization of IEC standard motors ensures problem-free delivery of explosion-proof motors or of special voltages.
- Optimized flow simulation
- Open impeller with optimal hydraulic characteristics and high stability
- Extremely low noise generation
- EHEDG certified
- Spiral casings made from rolled steel
– Low weight
– Excellent surface quality
– Excellent CIP/SIP-qualities
Shaft Seals, JP-Series
- Single-acting shaft seals
- Rinsed shaft seal
- Double-acting shaft seal
- Simple maintenance: All pumps can be maintained without dismantling the pipeline
- The spring positioned outside the product space guarantees the best CIP/SIP characteristics
- Constant active rinsing of the shaft seal
- Various material combinations are available:
– Coal/Silicon carbide
– Silicon carbide/silicon carbide
- Various elastomers with FDA certificate:
– EPDM
– FPM
System Advantages JPS
The new JPS-series is utilized in the following instances: return applications, tank drainage, the discharge of gaseous products.
Design:
The self-priming Jabsco JPS-Series is based on the normal-priming centrifugal pumps in the JP-Series. A so-called screw-rotor is fitted upstream on the suction side of the JP-Series. The rotor is simply connected with screws on to the pump shaft at the place where the impeller nut is generally installed. The rotor housing is welded eccentrically on to the pump cover and ends at the pump’s suction connection.
MODE OF OPERATION:
When no gas cavities are present in the material being conveyed, the JPS-Series operates virtually like a conventional Centrifugal Pump. When the products being conveyed contain gas cavities the centrifugal force forms a liquid ring (2) in the screw-rotor and the gases are concentrated in the middle. The liquid ring seals the rotor blade (1) on the outside of the rotor housing (3) and also on the upper side of the rotor hub. This prevents trapped gases from flowing back. Thanks to the eccentric design of the rotor housing the gases collect underneath the rotor hub (4) and the rotor blades then convey them through the pump. A recirculation pipe (5) fitted on the outside of the pump ensures that liquid is constantly recirculated into the rotor housing, thus ensuring the pump’s suction capacity even when 100% gas is conveyed over longer periods of time. Self-priming (evacuation of the suction line) from a negative level is also possible with this pump.
Further technical Data:
In accordance with the JP-Series
APPLICATIONS
- Foodstuff
- Dairy Products
- Beverages
- Pharmaceuticals
- Cosmetics
- Biotechnology
- Paper and Chemicals
- Paints and lacquer
- Waste water from the textile industry
CHARACTERISTICS
Characteristic type JP, n=2,900 min-1. 50 Hz
Characteristic type JP, n=3,500 min-1, 60 Hz
Characteristic type JPS, n=2,900 min-1, 50 Hz
Characteristic type JPS, n=2,900 min-1. 50 Hz
Downloads
Product Overview of the Jabsco Centrifugal Pump (JP- & JPS-Series):
Characteristic Diagram of the Centrifugal Pumps of the JP- & JPS-Series, 50 & 60 Hz:
Talk to us directly!
We will advise you honestly and as a respected partner.
Simply give us a call. We will directly forward your call to the specialist who can provide you with competent advice. We look forward to hearing from you!
Tel. 0231-9612 28-0
sales@isg-do.com
Contact
We develop your Solution!
INNOVATIVE SYSTEMS
Center of Competence
Food Beverage & Pharma
Hildastraße 10
D-44145 Dortmund
Tel. 0231-9612 28-0
Fax 0231-9612 28-10
www.isg-do.com
sales@isg-do.com